DeepCool Assassin 4S Premium CPU Air Cooler, Dual-Tower, Single Center 140mm FDB Fan, 7 Copper Heat Pipes, Quiet/Peformance Mode Switch, Black
- Change between quiet 22.6 dB(A) and Performance modes by simply flipping a switch.
- The majestic shroud, which houses dual-tower heat sinks with seven copper heat pipes, channels all the airflow through the entire cooler.
- Designed with a quiet and efficient 3-phase 6-pole fan motor, the 140mm fan provides optimal air flow at a low noise level.
- A tube of DeepCool’s industrial grade DM9 thermal paste is included.
- Supports the vast majority of modern Intel and AMD CPUs while providing unobstructed clearance for high-profile RGB RAM modules.
DeepCool Assassin 4S Premium CPU Air Cooler, Dual-Tower, Single Center 140mm FDB Fan, 7 Copper Heat Pipes, Quiet/Peformance Mode Switch, Black
$79.99
Additional information
Specification: DeepCool Assassin 4S Premium CPU Air Cooler, Dual-Tower, Single Center 140mm FDB Fan, 7 Copper Heat Pipes, Quiet/Peformance Mode Switch, Black
|
Reviews (10)
10 reviews for DeepCool Assassin 4S Premium CPU Air Cooler, Dual-Tower, Single Center 140mm FDB Fan, 7 Copper Heat Pipes, Quiet/Peformance Mode Switch, Black
Show all
Most Helpful
Highest Rating
Lowest Rating
SoCal girl –
I used this cooler on a 5800X3D and it keeps temps in the 50s and 60s while gaming. I have a really good airflow case aswell. No issues with the display either
Amazon Customer –
Cooling is very good, but the box does not have any thermal paste besides the pre-applied, which leaves a very little amount if u mess up. The digital display also does not work, and only the rgb lights up.
Mike M. –
I can’t believe that under full load with a 71F ambient air temp, this cooler keeps a Ryzen 5900X at 71-74C, this is an incredible value and I would immediately recommend this cooler to any one looking for something that will work and looks half way decent. DeepCool does have some more aesthetically pleasing coolers but I kinda like seeing the tops of the heat pipes
Pros:
-Works with Gigabyte RGB Fusion
-Really easy to install overall
-Really attractive cooler
-keeps a Ryzen 5900X below 75C under full load
-Great build quality – really feels like you have a good cool in your hands
Cons:
-Slightly clunky to installed compared to the AG400 – for this cooler you need to remove the fan attached to the ‘front’ to screw the cooler to the bracket, putting it back on allow for the opportunity to bend fins and if you don’t get it just right it might be of center
-could be a problem if you have a small case
Images: Left to right:
1. Cooler in case
2. Top of cooler in case
3. AMD adrenalin reporting temperature and 100% CPU usage (ambient air temp was 69F/20C)
4. CPU Temp reporting temperature under 100% CPU usage(ambient air temp was 69F/20C)
Jason –
Se ve muy estético físicamente. En cuanto a temperaturas mantiene entre 40 y 70 grados un Rayzen 5 5600
Jason –
Me encantó este artículo, tenía el ventilador de stock de Intel que para ser tan pequeño estorbaba en mis memorias ram y cuando le exigía de más al procesador hacia como un arrancón que sonaba bastante para enfriar rápido.
En diferencia este enfriador no hace prácticamente ruido y bajo todas mis temperaturas de golpe. Antes en reposo tenía temperaturas de 55 grados con un i3 12va, ahora maneja de 37 a 40 grados y cuando pongo un juego muy exigente llega a 60 grados, cuando antes rondaba entre 75 y 80 grados.
Cómo nota el cable USB es para que prenda la pantalla de temperatura y el de 3 pines es para el rgb de abajo de la pantalla, es muy discreto, no siento que valga tanto la pena conectar este último.
Amazon Customer –
Bought this as a sidegrade to my Noctua NH-D14 because I wanted something that looked nicer. In that regard, this cooler does a good job looking sleek and fitting into my white build. This is cooling a Ryzen 5 3600 and it’s more than enough for that.
Installation is similar to my previous Noctua cooler (AKA very easy) and it cleared my low profile ram and the components on my ASRock B550M Steel Legend motherboard. I can’t comment much on noise as I’m using a triple fan setup including 2 aftermarket fans.
My only complaint is with the use of a gray fan in the back, which ruins the all white look. Otherwise, I’m happy with this cooler and would recommend it if you have the space in your case.
Raphael –
The media could not be loaded.
Very easy to install, quiet and worth it, to control the temps it needs a usb head on your mb and also the 3 pins Argb for the colors, it kept my 12400f nice and cool, I don’t remember how much it got in a stress test but I think was about 50c
Raphael –
I am upgrading an HP EliteDesk 800 G5 SFF for a special work project and needed to upgrade the CPU. The included cooler was insufficient and I need something better that still fit. This cools the i7-9700 CPU selected extremely well and fits the case with zero issues. For a well cooled, low profile case this is a solid performer. It’s also very quiet for how well it works
drainedsail0r –
This fit perfectly, I used my own cpu paste. So far it is working as advertised and looks great as well. At some point the fins may need to be air dusted as they are offset making a cool pattern.
drainedsail0r –
For context i bought a used ibuypower pc that had a bad aio so cpu got hot fast and the mounting braket for the block of the aio had bad screws and i needed to remove the mouinting braket by force and i orderd the ag400 in advace it went on like a glove easy to use brakets rgb control with lots of sofware and cold temps i wish that the price of the ag500 went back down to 35 but that would be my only complaint