Frigidaire WF2CB PureSource2 Ice And Water Filtration System, White,1-Pack
- Enjoy fresh tasting water right from the fridge and directly in your glass with the PureSource 2 water filter. Designed to remove harmful contaminants giving you peace of mind with every glass
- The PureSource 2 WF2CB is designed with a carbon-based filter to improve your water by removing the odor and taste of chlorine for smoother drinking, making it easy to keep the whole family hydrated
- Take a sip and relax as you let your filter get to work reducing impurities found in common tap water such as lead, nitrates, pesticides, and mercury for worry free water at home
- The WF2CB water filter is easy to install. Push the release button to remove the old filter. Slide the new filter in until it clicks into place. Run water through the new filter for 3 minutes to prime it. Discard the water or use it to water plants.
- Your refrigerator’s reminder light does not turn off automatically. Most reminder lights are reset by pressing and holding the water filter button on the dispenser control for 3 seconds. When the display changes from red to green, the status has been reset
Frigidaire WF2CB PureSource2 Ice And Water Filtration System, White,1-Pack
Original price was: $44.99.$21.13Current price is: $21.13.
Additional information
Specification: Frigidaire WF2CB PureSource2 Ice And Water Filtration System, White,1-Pack
|
Reviews (10)
10 reviews for Frigidaire WF2CB PureSource2 Ice And Water Filtration System, White,1-Pack
Show all
Most Helpful
Highest Rating
Lowest Rating
ALEX –
valor/beneficio
Leonard J Diaz –
Standard water filter. Readily fits & easy to install.
Krystal Rowe –
My dad’s ice maker stopped working in his Frigidaire side by side so we ordered this to see if it was the culprit. Working great again. Easy to install.
Luke –
These are half the price on Amazon and are authentic parts. They work great!
zachary smith –
I like water. Good water more specifically. I buy the fancy bottled water. I know, I am ridiculous. But this filter does my fridge proud. It was easy to install. Then run some water through it to get it flowing and clean it out a little. Then you have great tasting water. Simple, easy, and nice.
It lasts us about 6 months, and I am a pretty heavy user, but the fridge notifies us when it is time to switch to a new one. They deliver it quickly and I have never gotten one damaged. Worth the buy in my opinion.
james haro –
Worked perfectly, got to me fast and fit great…
otisraccoon –
I was not happy with this unit at first. Like so many others, mine would fly out and leak water when pressing the water release. I started the return process and began looking for a new refrigerator. Then I found some information that these filters had been redesigned since my purchase (prob 10 years ago), and the water filter base could not latch on to these newer filters. After searching on repairclinic.com, I found the part for $61.90/free shipping, and reviews stating how easy it was to repair. I received the water filter base 2 days after ordering, and it might have taken me 40 minutes to replace (Just because I was being careful). All you need is a phillips screwdriver and a 1/4″ nut driver/deep socket. You need to shut of the water first, and I would recommend removing the light bulb because it is hot and your hand needs to get in there. Here are the steps
1. In the rear right top, using the 1/4″ nut driver/socket, remove the hose cover.
2. On the front panel (where temp controls are), there are 3 screws that need to be removed with the 1/4″ nut driver/socket
3. On the left side top, remove the screw closet to the front with the 1/4″ nut driver/socket
4. In between the 2 phillips screw holding the water filter base in place, there is 1 more 1/4 nut to take out. Now that you can drop it down, remove the 2 phillips screws holding the water filter base in place
5. Remove the 2 phillips screws holding the filter release latch in place
6. Remove the 2 water hoses from the rear of the water filter base.
7. Turn the water filter base so you can remove the release latch, and remove the old water filter base
8. Put the new water filter base in place, turn it to feed the release latch back in, push in the water hoses (they will lock once pushed in far enough), screw water filter base in place (2 phillips screws).
9. Put screws back in that hold the release latch(2 phillips and clips)
10. Put all of the screws you removed with the 1/4″ nut driver/socket back in place
11. slide new filter in, and everything works again
Sure this was a terrible design flaw by Frigidaire, and I will never purchase an appliance from them again, but $62 and 40 minutes is better than purchasing a new fridge at this point. Trust me, it is easy
Amazon Customer –
Works great last long
Paul –
Easy to install and works well.
Brandon –
Better than the cheap filters!
I have tried cheap and it does not taste good so we went back to the original and it tastes much better. I recommend this product over the others!