TRENDnet Shielded Cat6A RJ45 Keystone Jack 6-Pack Bundle, Recommended use with TC-KP24S or TC-KP12V (Sold Separately), Silver, TC-K06C6A
- 6-PACK: Includes six TC-K06C6A TRENDnet Cat6A shielded tool-less keystone jacks; Six Cable Ties; Quick Installation Guide
- RECOMMENDED USE: We recommend using these keystone jacks with TC-KP24S or TC-KP12V (Sold Separately)
- CAT6A PERFORMANCE: Each shielded Cat6A keystone jack provides up to 10Gbps speeds over 100m (328 ft.) of Cat6A Ethernet cabling.
- CABLE COMPATABILITY: These metal keystone jacks are compatible with Cat5e, Cat6 and Cat6A cabling.
- SHIELDED DESIGN: The shielded metal housing design protects against EMI/RFI noise for a more stable connection, and a 180° angle termination design
- TOOL-LESS DESIGN: Tool-less design with convenient wire separation for easy installation.
- CONVENIENT COLOR-CODING: Color-coded labeling for T568A and T568B wiring schemes for easy cable termination
- METAL HOUSING: Each keystone jack features an all metal jacket design for long lasting durability
- NDAA & TAA COMPLIANT: This National Defense Authorization Act (NDAA) compliant switch abides by the guidelines that prohibits equipment or components from certain Chinese companies and their subsidiaries. TAA compliant in accordance to the Trade Agreements Act (19 U.S.C. & 2501-2581
TRENDnet Shielded Cat6A RJ45 Keystone Jack 6-Pack Bundle, Recommended use with TC-KP24S or TC-KP12V (Sold Separately), Silver, TC-K06C6A
$24.99
Additional information
Specification: TRENDnet Shielded Cat6A RJ45 Keystone Jack 6-Pack Bundle, Recommended use with TC-KP24S or TC-KP12V (Sold Separately), Silver, TC-K06C6A
|
Reviews (8)
8 reviews for TRENDnet Shielded Cat6A RJ45 Keystone Jack 6-Pack Bundle, Recommended use with TC-KP24S or TC-KP12V (Sold Separately), Silver, TC-K06C6A
Show all
Most Helpful
Highest Rating
Lowest Rating
Bryan –
Got these a bit ago and finally got to use them.
They worked well. I did learn to be careful and make sure you get the excess wire cut as short as possible one on because a few I had failed tests. Turns out the wires had been a bit longer and broke the protection tape or whatever causing contact on metal and thus a short.
Beyond being very picky on tolerance with that they seem great. No tool needed except to cut the wire and strip etc.
Giuseppe –
After terminating several Cable Matters Keystones I found these to be a bit easier to work with. Only caveat is the other brand has the nice little shutter door that these do not but in the end it worked out swell.
nioa –
Very well made product, the metal material provides shielding and is of high quality, the plastic molding is high quality as well. As long as you correctly lay your wires in the right order and make sure they sit down in the molded guides properly, this product makes it very easy to terminate a Cat 6A cable. When finished, you join each half together with a squeezing tool like a plier, and get a reassuring click; telling you that the halves are properly seated. Will accommodate a large variety of 6A cable jacket sizes. The jack fits in the keystone receptacle perfectly.
Aaron Franke –
Wired it up without much hardware experience. It did not take too long and worked at full speed once connected.
Micha S –
Extremely happy with the way these performed and terminated the CAT6A cable. Very easy to use and does the job right. Very expensive though but they are well built
Joey A. –
Just got them, will install them shortly. They look solid and very durable.
R Holderbein –
This connector works great with thicker Cat 6a 23 AWG cables. Installation is very simple and the color coding on the wire guide makes it fool proof. Fold the drain wire back before inserting the cable into the wire guide. To create an even better electrical connection to the metal housing, wrap the outer jacket and drain wire with 1/2″ wide copper tape. Closing the two hinged parts of the metal housing creates the electrical connections, channel lock pliers work well for this step. Out of 14 connectors installed, I had zero failures.
AmazonCustomer –
These are great couplers that fit all my cables and each port of my keystone panel well. I wish they flipped 180° in the back to make removing the cables a little easier, but overall, happy with this purchase